Product Details
Home> Product Details

4*2 HDMI Converters

4*2 HDMI Converters
  • Product Introduction
Number:: LK-HDMA42

  INTRODUCTION

 Dear customer

 

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

 

Our series of HDMI Converters, switchers, extenders, matrixes and splitters are designed to make your A/V device use more convenient, more comfortable, more productive and more cost-efficient.

 

The 4x2 HDMI Matrix can use four HDMI sources to connect two HDMI sinks. The matrix allows four HDMI devices to be switched or split easily to two HDMI compatible monitors or projectors. The Matrix can also be placed at the end of a long HDMI cable to regenerate the HDMI signal.

 

Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

 

 

FEATURES

Four HDMI input signals switched or split to two HDMI sink devices

Support CEC

Support deep color 30bit, 36bit

Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC

Digital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

Support signal retiming

Support input up to 15metres AWG26 HDMI standard cable length, output up to 25metres AWG26 cable length

l   Inputs can be switched with the IR remote controlalso can be controlled by two buttons.

l   It can smartly jump over those input sources which are not connected.

With the smart function of memory, it can come back to the latest status when restarted or reconnected.

No loss of quality

Installs in minutes

Need DC5V/2A power supply

 The accessories with the machines lists as picture

 

15V Power Adaptor

2Remote

3one pc of Manual
Power Adaptor


1529651327657011830.bmp


Remote

1529651415085018434.bmp

Physical Connection Showing Picture

1529651492503085849.bmp
                                       Figure 1.0 Front Panel Showing Picture

The Power Status Led Light

IR: IR Receiver

Input 1- Input 4HDMI input led status light

Output AHDMI A output led status light

Output BHDMI B output led status light

Switch A: HDMI A output switch button

Switch B: HDMI B output switch button

1529651666261002415.bmp
                                               Figure 1.1 rear panel showing picture

Output BHDMI B output interface

Output AHDMI A output interface

Input 1- Input 4HDMI input

DC/5V: 5V DC-DC interface

 

 

Operating and Connecting

1.          Connect one cable from each HDMI source devices into HDMI Matrix inputs.

2.          Connect one cable from each display (monitor or projector) into the HDMI Matrix   outputs.

3.          Connect 5V power supply to the HDMI 4x2 Matrix.

 

 

SPECIFICATIONS:                  LK-HDMA42          

HDMI resolution ………………………....24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i

Support video color format …………………………..…………….24bit/deep color 30bit,36bit

Support audio format……………….DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

Max bandwidth…………………………………………………………………………….225MHz

Max baud rate…………………….………………….…………………………………..6.75Gbps

Input/Output TMDS signal ………….……………………………….……0.5~1.5Volts p-p(TTL)

Input/Output DDC signal ……………………………………………..………… 5Volts p-p (TTL)

Input cable distance..…... ………………………. ….…..≤15m AWG26 HDMI standard cable

Output cable distance……………………………….…...≤25m AWG26 HDMI standard cable

Max working current…………………………………………………………………………800mA

Power adapter format…………….…..Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/2A

Operating Temperature range……..…………….………………………………… (-15 to +55)

Operating Humidity range………………………….….……….5 to 90%RH (No Condensation)

Dimension (L x W x H)     ……………………………….………………………260x114x45 (mm)

Weight…..………………………………………………………..…….………………………1040g

 

 

 

IR Remote Operating Instruction

 

1Firstly take off the plastic film that inserted in the rear of remote board

2The A and B mean the HDMI A output and B output.

3If the Signal output from A,

Only press the number key below A line. Like after you press the 2 key under A line, the signal 2 will output from A.

4The plastic film is strongly advised to insert the rear of the remote board when the remote is not used for long time.

 

 Notes:

Pls use the machine as the instruction listed to keep the long use lifetime of the machine.

1.    The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive, and oxidative environment.

2.    All parts will be free from the strong shake, hit, fall.

3.    Touching the power adaptor with the wet hands is prohibited.

4.    Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.

5.    Pls turn the power off when the machine is not used for long time.

6.    Pls do not open the cover and do not touch the inside parts.

7.    Pls use the original factory power adaptor.

 

Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below:

 

Serial NO

Trouble Description

Cause and Ways to deal with

                     1

 Non-Power-Connected

1Check if the power   adaptor head is truly and correctly inserted the power socket.

2Check   the power switch if it is in on status.

2

No Picture

1Pls to make sure that the TV is on and has   been connected with the machine.

2To check if the signal source is on and   well connected.

3Check the system connection quality.

4Check if the line is all good quality.

5Check   the cable quality

3

Obscure Picture

1To try again to   connect the cable to be free from the unsuccessful connection.

2HDMI Cable Quality

4

Remote

1Pls check if the film   that stops the current has been taken out.

2To check if the remote   battery is working full.

 

 


Previous
Next