Welcome To Lulink Electronics Technology Co., Ltd. Official Website!

Online Service

LK10A414-1   Fiber Optic Splice Closure

LK10A414-1 Fiber Optic Splice Closure
Number: LK10A414-1
  • Product introduction

Type: Horizontal type four inlets/outlets

Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way

Dimension (CM): 46.7*18*12CM

Cables Entry & Exitfour inlets/outlets

Cable Diameter (mm): Φ7-Φ16

Sealing Structure : Silicon gum material Sealing

Material: ABS/PC

Maximum capacity: 96cores

Innovative design is an erect and horizontal type with one hinge in one side and open in another side. It is the most reliable FOSC in the world. The FOSC is suitable for protecting fiber cable splices in straight-through and branching applications. Based on an advanced formula, the plastic parts are made of injection-molded, high-strength engineering plastic ABS or PC by numerical control equipment; therefore effectively prevent products from aging caused by coldness, heat, oxygen and ultraviolet radiation. The strong housing and main components provide fire resistant, waterproof, and quakeproof while protecting splices during pulling, compressing, and impacting, bending, tensioning, axial tensioning.

It ensures long-term reliability and usage under ambient temperature from -40 to +75

Environmental temperature: -40 to +75

Atmospheric pressure: 70106KPa

Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.

Insulation resistance: ≥2X104

Span-life: 30 years.

It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network