Welcome To Lulink Electronics Technology Co., Ltd. Official Website!

Online Service

LK10A222-2 Fiber Optic Splice Closure

LK10A222-2 Fiber Optic Splice Closure
Number: LK10A222-2
  • Product introduction

Type: Waterproof Dome two inlets/outlets

Purpose: aerial, wall-mounting, Pipeline laying way

external dimensions:460mm*160mm Erect type

Cables Entry & Exit2Entry 2Exit

Cable Diameter (mm): Φ7-Φ25

Material: ABS/PC

Weight: 2.1kgErect type

Maximum capacity: 96cores

Span-life: 20 years.

Components: Seal tape, Insulation tape, Nylon tie, optical cable heat shrinkable sleeve, mental hook, seal fittings, numeral bar, retaining ring
Environmental temperature: -40 to +65

Atmospheric pressure: 70106KPa

Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won’t attenuate during the FOSC installation operation period.

Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.

Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation 

Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.

Insulation resistance: ≥2X104

It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network

Uses and properties:

   It is belonged to open structure airproof tie-in system of machine pressure.

   It is used for the protective connection between two or more optical cables

Suitable for single core fiber optic cable and ribbon fiber optic cable

Previous
Next