Welcome To Lulink Electronics Technology Co., Ltd. Official Website!

Online Service

Waterproof Dome Fiber Optical Splice Closure, Joint Box

Waterproof Dome Fiber Optical Splice Closure, Joint Box
Model: LK10P323-1
  • Product introduction

Type: Waterproof Dome three inlets/outlets

Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way

Dimension (CM): 51*22CM H*D

Cables Entry & Exit: 3Entry 3Exit

Cable Diameter (mm): Φ7-Φ25

Sealing Structure: Heat shrinkable Sealing

Material: ABS/PC

Maximum capacity: 144cores

Weight:: 3kgErect type

Components: Seal tape 1PC, Insulation tape  1PC, Nylon tie  4PCS, optical cable heat shrinkable sleeve 24PCS, mental hook 1SET, seal fittings 1PC umeral bar 1PC, retaining ring 6PCS
Environmental temperature: -40 to +85

Atmospheric pressure: 70106KPa

Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won’t attenuate during the FOSC installation operation period.

Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.

Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation

Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.

Insulation resistance: ≥2X104                                  

Span-life: 30 years.

It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network

Uses and properties:

It is belonged to open structure airproof tie-in system of machine pressure.

It is used for the protective connection between two or more optical cables

Suitable for single core fiber optic cable and ribbon fiber optic cable

Previous
Next