Item No.: LK10P124
Type: Waterproof Dome one inlets/four outlets
Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Weight: 3kg（Erect type）
Material: ABS / PC
Dimension (mm): 51*22CM （H*D）
Cables Entry & Exit：1Entry 4Exit
Cable Diameter (mm): Φ7-Φ31
Sealing Structure: Heat shrinkable Sealing
Max Capacity of Core：144 cores
Environmental temperature: -40℃ to +85℃
Atmospheric pressure: 70∽106KPa
Insulation resistance: ≥2X104MΩ
Span-life: 30 years.
Components: Seal tape 1PC, Insulation tape 1PC, Nylon tie 4PCS, optical cable heat shrinkable sleeve 24PCS, mental hook 1SET, seal fittings 1PC umeral bar 1PC, retaining ring 6PCS
Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won’t attenuate during the FOSC installation operation period.
Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure.
Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; Or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation
Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.
It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network
Uses and properties
It is belonged to open structure airproof tie-in system of machine pressure.
It is used for the protective connection between two or more optical cablesSuitable for single core fiber optic cable and ribbon fiber optic cable