Welcome To Lulink Electronics Technology Co., Ltd. Official Website!

Online Service

Waterproof Dome Fiber Optical Splice Closure, Joint Box

Waterproof Dome Fiber Optical Splice Closure, Joint Box
Model: LK10P126-1
  • Product introduction

Item No.: LK10P126-1

Type: Waterproof Dome one inlets/ six outlets

Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way

Weight: 4kgErect type
Material: ABS / PC

Dimension (mm): 55*25CM H*D

Cables Entry & Exit1Entry 6Exit

Cable Diameter (mm): Φ7-Φ31

Sealing Structure: Heat shrinkable Sealing

Max Capacity of Core288cores

Components: Seal tape 1PC, Insulation tape 1PC, Nylon tie 4PCS, optical cable heat shrinkable sleeve 24PCS, mental hook 1SET, seal fittings 1PC numeral bar 1PC, retaining ring 6PCS
Environmental temperature: -40 to +85

Atmospheric pressure: 70106KPa

Optic property: The spare fiber coiled in the fiber emplacing device; the fiber connector won’t attenuate during the FOSC installation operation period.

 

Seal Performance: After the closures are sealed, then pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; or observed for 24 hours, there is no change of air pressure.

Re-encapsulation Performance: The closures are pressurized up to 100KPa±5KPa in water, immersed in 15 minutes, there are no air bubbles; or observed for 24 hours, there is no change of air pressure after three times of repeat encapsulation 

Voltage-resistance strength: Under the effect of 15kv/DC/1min, non-puncture, and no arc-over.

Insulation resistance: ≥2X104                                

Span-life: 30 years.

It is widely used for communication, network system, cabled T.V. of CATV, the fiber optic cable by network

Uses and properties:

   It is belonged to open structure airproof tie-in system of machine pressure.

   It is used for the protective connection between two or more optical cables

Suitable for single core fiber optic cable and ribbon fiber optic cable

 

Previous
Next