Welcome To Lulink Electronics Technology Co., Ltd. Official Website!

Online Service

LK03SCSC402

LK03SCSC402
  • Product introduction

OM3 Multimode 50/125μm

OD3.0mm

Insert loss <0.25dB, return loss≥35dB

LSZH aqua color jacket

Polarity: A-TO-B, B-TO-A

Cable length: 1m, 2m, 3m, 5m, 10m, 15m.

Description:

The SC* connectors used for our patch cords are designed to NTT-SC* standards and are fully compatible with existing SC hardware. Two simplex connectors can be configured into a duplex format by adding a duplex clip.

In addition to basic testing, some mechanical and environmental tests per IEC or Telcordia are also performed periodically to guarantee the best quality. For standard patch cords, sampling check is performed on ferrule geometry to ensure high percentage of polished connectors meeting GR-326 requirements. For premium grade, ferrule geometry is tested on all patch cords to meet these GR-326 requirements.

Other than standard single mode and multimode fibers, G655, OM2, and OM3 fibers are also available upon request. Flame retardant grade cable sheathing options are offered. Riser rated cable will be provided as standard. LSZH and Plenum can be provided upon request.

*NTT-SC is a trademark of NTT Advanced Technology Corp.

 Features:

Push-pull latching mechanism

Non-optical disconnect performance

High quality zirconia ferrules

Materials meet RoHS requirements

Riser, Plenum, and LSZH cables available

Applications:

Telecommunication

Computer networks

CATV networks

Active device termination

Instrumentation

Optical Performance Distribution 


Specifications:


Dimensional Drawing

Previous
Next